CanDock RGB, Руководство по установке

Страница: 6 / 10

6
12. Take the black wire linked to the
13. Each light has a black wire (light power
4. Each light has a small black connector in two parts. Take the lower part of
15. Each metallic part of the connector allows an electrical connection with a
control box that has no connector at
its end and connect it to a power
plug adapted for your country.
The
blue wire being the negative one,
the brown wire being the positive
one, and the yellow and green wire
being the ground.
cable) and two white wires (light control).
1
the connector (bigger one) and put the main cable in the biggest part.
Beware, polarity must be respected to avoid damaging the light and/or
the control box.
The part of main power wire bearing the writings must be
linked to the side of the light wire of the light marked in white.
specific side of the wires on it. Make sure the wires lie such as shown in
the following picture. The part of the wire of the main supply bearing
writings must be linked to the side of the
supply wire of the light marked in white.
They must therefore be on the same side
in their respective space.