Cando 10-0709, Инструкция по эксплуатации

Страница: 13 / 14

12
Press the ‘SET’ key to increase maximum heart rate limit. After setting the maximum heart rate, press the
MODE key to adjust the minimum heart rate limit.
PERSONAL DATA SETTING
Accurate personal data will make the calories burned more accurate. Under SPEED or DISTANCE MODE,
hold the ‘SET’ key for 3 seconds to go into the setting, then continually press the ‘MODE’ key to get to the
personal data windows.
1. Press the ‘SET’ key to select the gender. (Male or Female)
2. Press the ‘MODE’ key to go to the weight unit setting. Press the ‘SET’ key to select the weight (Lb or KG).
Note:
this change of metric units to imperial units will also affect the corresponding display unit
(MPH/KPH and ML/KM).
3. Press the ‘MODE’ key to go to the weight setting. Press the ‘SET’ key to increase the weight by 0.5 Lb or
0.5 KG.
TROUBLESHOOTING
No Display on console
1. Press any key to bring the console to ‘Quick Start’ mode.
2. Ensure that the batteries are installed properly in the console and transmitter. If they are, install fresh
batteries.
No heart rate signal displayed
1. Ensure that your chest strap is worn correctly, and that there is moisture under the electrodes of the
chest strap.
2. Relocate the bike away from any equipment that could potentially interrupt the radio frequency signal,
such as a DVD player or television.
RPM or heart rate does not change
1. Press the ‘MODE key’ repeatedly to toggle between SPEED (SPD), DISTANCE (DIST), TIME (TIME) and
CLOCK (CLK) values.
2. Press and hold the ‘SET key’ repeatedly to clear past measured values, or go into setting and exit.