Cando 10-0708, Инструкция по эксплуатации

Страница: 12 / 14

11
Resetting all measured values
To clear all the measured values, press and hold ‘SET’ key under the TIME Mode for 3 seconds. All the
measured values for AVG SPEED, AVG PULSE, TIME, DIST, KCAL will reset to zero.
TIMER Setting
The TIMER displays the user’s exercise time. If the user does not set the COUNT DOWN TIME, the TIME will
count up from 00:00 to 99:59.
If the prior user set the COUNT DOWN TIME, the TIME will count down to
zero with the flashing display,
and the alarm will sound for 3 seconds. The TIME will change automatically from counting down to
counting up from 00:01. The user can go into the TIMER setting from SPEED or DISTANCE Mode by pressing
and holding the ‘SET’ key for 3 seconds.
CLOCK Setting
Under the CLOCK MODE, press and hold the ‘SET’ key, and the 12H or 24H will flash. Press the ‘SET’ key to
switch from 12H to 24H. Press the ‘MODE’ key to flash the CLOCK HOUR, then Press ‘SET’ key to adjust the
clock hour (0 – 24). Press the ‘MODE’ key again to flash the CLOCK MINUTE, then Press ‘SET’ key to adjust
the clock minute (0 – 59).
HEART RATE TARGET ZONES
Under SPEED or DISTANCE MODE, hold the ‘’SET’ key for 3 seconds to go into the setting. Press ‘MODE’ key
to go to the heart rate target zones window.