Ø
55
Drill Piping Hole
1.Slant the piping hole ( 55) on the wall slightly downward to the
outdoor side.
2.Insert the piping-hole sleeve into the hole to prevent the connection piping
and wiring from being damaged when passing through the hole.
Indoor
Outdoor
Wall pipe
Seal pad
Installation of Indoor Unit
drain hose
outlet pipe of
indoor unit
outlet pipe of
indoor unit
rubber belt
Installation of Mounting Plate
1. Mounting plate should be installed horizontally. As the water tray's outlet for the indoor unit is two-way
type, during installation, the indoor unit should slightly slant to water tray's outlet for smooth drainage of
condensate.
2.Fix the mounting plate on the wall with screws.
3.Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the
weight should be evenly shared by
each
screw.
1.
2.
3.
Installation of Drain Hose
Connect the drain hose to the outlet pipe of the indoor unit.
Bind the joint with rubber belt.
Put the drain hose into insulating tube.
Wrap the insulating tube with wide rubber belt to prevent
the shift of insulating tube. Slant the drain hose downward
slightly for smooth drainage of condensate.
Note: The insulating tube should be connected reliably with
the sleeve outside the outlet pipe. The drain hose should be
slanted downward slightly, without distortion, bulge or
fluctuation. Do not put the outlet in the water.
bulge
distortion
outlet pipe of
indoor unit
insulating tube
connected
insulating tube
outlet pipe of
drain hose
indoor unit
rubber belt
rubber belt
Flooded
Ф
Ø55
845
275
542
131
256.8
124
50
Ø55
50
100
Fig.5
18K UNIT:
09
、
12K UNIT:
275+0.5
-
55
99
575
9.5
55
99
685
189
1018
315
Ø5
5
45
Ø
55
65
25
