8
Chapter 3 Operation
)
1. After pressing the power On/Off key for 2~3 seconds
to sound a long
“beep”
.
2. Only for the valid key of PG-H1 will sound a short
confirmed
“beep”
after pressing the key.
3. The chosen option will blink.
4. After you had changed the values, remember to press
“
Enter”
indicated key to take the changed values
effectively.
3.1 Starting Status
After you pressing the
Powe
r key to power on the PG-H1,
the LCD screen will show you the PG-H1 version suddenly
then show you the main screen as below (or previous
setting values saved in the PG-H1’s memory):
P01 640x480 @60
P01:
Pattern 01 (refer to Appendix B:
Pattern chart
chapter
)
640x480:
Resolution is 640X480
@60:
Refresh rate is 60Hz
“ ”:
The power of battery is charging.
To the LCD screen lower left will show you the PG-H1
operated mode.
DVI/H8/H10/H12
DVI:
Process PG-H1 under DVI mode.
H8:
Process PG-H1 under HDMI 8bit mode.
H10:
Process PG-H1 under HDMI 10bit mode.
H12:
Process PG-H1 under HDMI 12bit mode.
RGB/Y444/Y422
RGB:
Process PG-H1 under RGB Color Space
.
Y444:
Process PG-H1 under RGB Color Space.
Y422:
Process PG-1 under YUV422 Color Space.
(When under the DVI mode, only support bypass mode)