OPER
A
TION INS
TRUCTIONS
8
OPERATION INSTRUCTIONS
Lighting the Torch:
• Close all the valves.
• Open the cylinder valve slowly.
• Open the torch adjusting valve with a 1/8 turn or until gas is heard
when the safety trigger is pressed down.
• Ignite the torch by using an igniter such as a flint striker (not
included).
• Adjust the torch adjusting valve to control the intensity of the flame.
If gas doesn’t flow, then reset the torch. To reset:
• Release the safety lever and close the torch adjusting and cylinder
valves.
• Wait 10 to 20 seconds.
• Open cylinder valve slowly. Then, open the torch adjusting valve,
press down on the safety trigger, and ignite.
NOTE: If the torch continues not to operate properly, turn off the
valves and check that the propane cylinder isn’t empty.
Shut off the Torch:
• Release the safety trigger (if needed) to reduce the flame from
large to a smaller size.
• Turn the cylinder valve off so no more gas escapes the cylinder.
The flame may continue for a short amount of time, but should
extinguish quickly.
• Turn the torch adjusting valve to the closed position once flame is
no longer visible.
Disconnecting the Propane Cylinder:
• Make sure that the propane cylinder is turned off.
• Disconnect the POL fitting connector from the propane cylinder.
• Place the protective plastic plug back on the cylinder valve outlet
connection.
6
"
flame
length
27
"
flame
length
