CANAWELD Plasma Cut 45 D, Руководство пользователя

Страница: 7 / 24

7
•
Be alert that welding sparks and hot materials from welding can easily go through small cracks
and openings to adjacent areas. Be aware that welding on a ceiling, floor, bulkhead, or partition
can cause fire on the hidden side.
•
Watch for fire, and keep a fire extinguisher nearby.
GASES
Dangerous gases can be produced during welding, breathing these gases in can be hazardous to your
health.
•
Shut off shielding gas supply when not in use.
•
Always ventilate confined spaces or use approved air-supplied respirator.
•
Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays of
the arc can react with vapors to form highly toxic and irritating gases.
EMF- ELECTRIC MAGNETIC FIELDS
During welding, electric magnetic fields are created and can produce malfunctions in electrical
components within the area.
•
EMF created by welders may affect wearers of Pacemakers and other Implanted Medical
Devices should keep away.
•
Implanted Medical Device wearers should consult their doctor and the device manufacturer
before going near arc welding, spot welding, gouging, plasma arc cutting, or induction heating
operations.
EXCESSIVE NOISE
Be mindful if your working area creates excessive noise.
•
Wear approved ear protection if noise level is high.
•
Any workers close by the area will also be effected by the noise and may also require hearing
protection.