Specification
Size
14.3mm*13.8mm*122.5mm
Capacity
350mAh
Standby Mode
Power consumption <15μA
Load
Load range: 0.5-0.8 Ω
Turn On/Off
In standby mode, press the button to shut down 5 times within 2S, and the blue-green-red horse flashes
once in order to prompt shutdown.
Tap Switching and Output
In standby (power on) state, press the button for 3 times continuously for 1.5s to switch the
gear, each time can only switch the gear once, blue-green-red-blue...Switch in turn.
First- blue: 3.3V; Second-green :3.6V; Third-red: 3.8V
Working Mode (Carrying/Smoking)
Load detection (whether on or off): the current gear light of the load will shine
once (duration: 300ms). On (standby), press the button not to release, press the current gear voltage output (the
corresponding color light will be longer on display), release the button to stop the work immediately.
Timeout
Timeout: the maximum working time is 15s, and the indicator light of timeout current status flashes 3 times
quickly.
Low Power Protection
The battery voltage under no load is less than 3.2V (the battery voltage under load is
less than 2.8V). Press the button and it will not work, and the red light will flash 5 times.
Short Circuit Protection
In case of short circuit of heating wire or low resistance value (< 0.6Ω should be protected),
MOS will be automatically shut down to stop output to prevent burnt circuit board.
Charging
1. Type-C charging port
.
2. 5V500mA/1A/2A input, 4.2±1%V current 450-500mA at the battery end.
3. You can smoke output when charging, priority to display the working
gear light, do not smoke display
charging indication.
Scintillation Period
250/250ms
Output Interface
510 Thread
www.canatura.com/en
