INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
1
1
3
3
Track assembly
Track assembly
Body
PUSH SIDE
Spring Power
Adjusting Screw
Spring Power
Adjusting Screw
Right Hand Reverse - RHR
Body
2
Install the body to the frame.
Install the track assembly to the door.
Hold-Open: Slider, Stopper, Side cap in to the track.
Non Hold-Open: Slider, Side cap in to the track.
Hold-Open: Slider, Stopper, Side cap in to the track.
Non Hold-Open: Slider, Side cap in to the track.
2
Slider
Stopper
Track
Side cap
Slider
Stopper
Track
Side cap
4
* See back page for closer adjustment.
5
45°
Figure 1
Figure 2
Figure 1
Figure 2
4
* See back page for closer adjustment.
5
45°
Main Arm
2-15/16
(75)
11-1/8
(282.5)
20-5/16
(516)
2
(51)
1-1/8
(28.5)
29/32
5/32” Drill or Drill & Tap 10-32 UNF
3/16” Drill or
Drill & Tap
1/4-20 UNC
1
9
00 S
E
RI
E
S
S
ANHO
1
90
0
S
AHO1
90
0
SANHO19
00
SAHO1900
1
900 S
ERIE
S
TOP JAMB (120°)
AN INCORRECTLY INSTALLED OR IMPROPERLY
ADJUSTED DOOR CLOSER CAN CAUSE
PROPERTY DAMAGE OR PERSONAL INJURY.
THESE INSTALLATION INSTRUCTIONS SHOULD
BE FOLLOWED TO AVOID THE POSSIBILTY OF
MISAPPLICATION OR MISADJUSTEMENT
CAUTION
CAUTION
PUSH SIDE
Left Hand Reverse - LHR
Use diagram below to locate holes on door and frame:
4 holes on frame for door closer
2 holes on door for track assembly
Use diagram below to locate holes on door and frame:
4 holes on frame for door closer
2 holes on door for track assembly
(23)
2-15/16
(75)
11-1/8
(282.5)
20-5/16
(516)
2
(51)
1-1/8
(28.5)
29/32
5/32” Drill or Drill & Tap 10-32 UNF
3/16” Drill or
Drill & Tap
1/4-20 UNC
(23)
DIRECTION
and
SEQUENCE
CAUTION
DIRECTION
and
SEQUENCE
CAUTION
Install the body to the frame.
Install the track assembly to the door.
Main Arm
45°
45°
Installation Instructions
1900 SERIES DOOR CLOSER WITH SLIDE TRACK ARM (SAHO1900/SANHO1900)
HINGES SIDE
HINGES SIDE
(
SAHO1900
)
(
SAHO1900
)
SA1900-INST-EN-2016/09 2/2
2
(51)
2
(51)
Install main arm to pinion shaft of door closer, see Figure 1.
Rotate the main arm and attach to the slider, see Figure 2.
Install main arm to pinion shaft of door closer, see Figure 1.
Rotate the main arm and attach to the slider, see Figure 2.
Adjust Hold-Open angle (if applicable)
Adjust door closer power and speed as
per door closer instructions
Install cover to the body.
Adjust Hold-Open angle (if applicable)
Adjust door closer power and speed as
per door closer instructions
Install cover to the body.