19
00 S
E
R
IES
S
ANHO
1
90
0
S
AHO1
90
0
SANHO19
00
SAHO1900
1900
SER
IES
Use diagram below to locate holes on door and frame:
4 holes on door for door closer
2 holes on frame for track assembly
Use diagram below to locate holes on door and frame:
4 holes on door for door closer
2 holes on frame for track assembly
1-1/8
(28.5)
1-1/8
(28.5)
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
1
1
Body
Track assembly
Track assembly
Body
LATCH
SPEED
SWEEP
SPEED
BACKCHECK
CONTROL
Fast
Slow
Opening cycle
Closing cycle
FIXING HOLE FOR COVER
Optional
DELAYED ACTION
Decrease
Increase
Slider
Stopper
Track
Side cap
Slider
Stopper
Track
Side cap
4
5
45°
Main Arm
Figure 1
Figure 2
4
5
Main Arm
Figure 2
Figure 1
2- 15/16
(75)
11 - 1/8
(282.5)
29/32
(2 3)
2- 15/16
( 75 )
11 - 1/8
( 282.5 )
2
(50)
29/32
(2 3)
4mm Hex key
.
SPRING POWER ADJUSTMENT
Installation Instructions
1900 SERIES DOOR CLOSER WITH SLIDE TRACK ARM (SAHO1900/SANHO1900)
STANDARD (120°)
PULL SIDE
PULL SIDE
Spring Power
Adjusting Screw
Spring Power
Adjusting Screw
Spring Power
Adjusting Screw
Right Hand Door - RH
Left Hand Door - LH
Hold-Open: Slider, Stopper, Side cap in to the track.
Non Hold-Open: Slider, Side cap in to the track.
Hold-Open: Slider, Stopper, Side cap in to the track.
Non Hold-Open: Slider, Side cap in to the track.
2
2
DIRECTION
and
SEQUENCE
CAUTION
DIRECTION
and
SEQUENCE
CAUTION
3
3
Install the body to the door.
Install the track assembly to the frame.
Install the body to the door.
Install the track assembly to the frame.
Install main arm to pinion shaft of door closer, see Figure 1.
Rotate the main arm and attach to the slider, see Figure 2.
45°
45°
45°
Spring Power
Adjusting Screw
2
(51)
20-5/16 (516)
5/32” Drill or Drill & Tap 10-32 UNF
3/16” Drill or
Drill & Tap
1/4-20 UNC
20-5/16 (516)
5/32” Drill or Drill & Tap 10-32 UNF
3/16” Drill or
Drill & Tap
1/4-32 UNC
SA1900-INST-EN-2016/09 1/2
CLOSER ADJUSTMENT
HINGES SIDE
HINGES SIDE
(
SAHO1900
)
(
SAHO1900
)
*SEE DOOR CLOSER
INSTRUCTIONS
FOR DETAILS
2
(51)
2
(51)
Adjust Hold-Open angle (if applicable)
Adjust door closer power and speed as
per door closer instructions
Install cover to the body.
Adjust Hold-Open angle (if applicable)
Adjust door closer power and speed as
per door closer instructions
Install cover to the body.
Install main arm to pinion shaft of door closer, see Figure 1.
Rotate the main arm and attach to the slider, see Figure 2.