pg. 11
7. MOUNTING BLADE BRACKETS TO BLADES TO MOTOR
INSTALLATION
NOTE: Choice of 4 or 5 blades (option on some fans)
Some fans offer the option of four or five blade operation. In these cases there will
be two rows of screw holes in the motor casing. The inside row will contain 8 holes
for 4 blades and the outside row will contain 10 holes for 5 blade use.
• obtain hardware containing motor screws and lock washers.
• place lock washers over motor screws, position motor screws in blade
brackets,and secure to motor.
• make sure all screws are tightened securely.
NOTE: On those fans with an extra
wide switch housing cover there will
be a cut out section provided allowing
access to screws when installing the
blade brackets.
NOTE: Fan comes with THREE RUBBER
STOPS on motor for shipping purposes
only. Remove stops before installing the
blades to the motor.
inside holes
outside holes
motor
lock washer
motor screw
cut out section
switch housing
cover
remove rubber stops
