Page 3 of 3
M0059 - 02/09/04
CEILING MOUNT KIT:
WARNING:
Ensure that fan is mounted on joist or beam capable of supporting the fan, and that suitable hardware is used.
Mounting Bracket Installation: (See Figure 4)
1. Take out mounting bracket (2) and remove the three screws and washers.
2. Mount mounting bracket (2) to ceiling with appropriate hardware. (Hardware not provided) Choose hardware suitable for
ceiling/beam style.
3. Thread middle bolt (1) to mounting plate, use this bolt to locate fan. WARNING: Do not rely on this bolt alone to hold the fan.
4. Align middle hole on mounting bracket with mounting plate on fan base and insert bolt with flat washer (3) through mounting
plate into mounting bracket. Thread bolt half way, do not fully tighten.
5. Rotate fan to desired position and install two bolts (1) and washers (3) removed in step 1. Tighten all bolts to secure fan.
Safety Cable Installation: (See Figure 5)
1. Remove the two safety cables from packaging.
2. Attach safety cable to fan by looping cable (1) through bracket on side of fan housing and then through loop at other end of
cable as shown in diagram.
3. Repeat step 2 for to install the second safety cable on opposite side of fan housing.
Figure 4
Figure 5
1
TO ADJUST TILT:
Loosen handles ONE (1) turn only. Adjust to desired tilt and tighten by turning handles back 1 turn.
CLEANING:
WARNING
: Unplug from electrical supply source before cleaning. After servicing, any safety device (including guard and blades)
must be installed or remounted properly. To clean blades use a soft damp cloth then wipe with dry cloth. Do not use harmful
cleaners. Do not bend the blades.
CANARM LTD.
CANARM LTEE.
2157 PARKEDALE AVENUE
8500 RUE GRENACHE
BROCKVILLE, ONTARIO K6V 5V6
ANJOU, QUEBEC H1J 2B1
TELEPHONE: (613) 342-5424
TELEPHONE: (514) 353-2255
FAX: 1-800-263-4598
FAX: (514) 353-2522
E-MAIL: [email protected]
E-MAIL: [email protected]
1
2
3
