PF52-M - 03/16/12 Page 4 of 5
Attach the small pulley to the motor shaft. Be certain
the small pulley aligns straight with the large pulley.
See
Diagram 6.
STEP 11
Place the MX V4 belt around the small pulley, sliding
onto the large pulley and tensioner in one motion.
Note: rotating the wheel and pressing the tensioner
closer to the wheel will allow the belt to mount easier
on the pulleys.
STEP 12
If using the panel mounting kit, bolt the universal wall
mounts to the wall or beam that will hold the base of
the mount. Next, place the U bolts in the appropriate
holes to hold the L mount in place.
STEP 13
The L mount end will slide through the U bolts on the
mounting plate located on the bottom of the panel
fan frame. Tighten the U-Bolts once the desired
position has been established.
STEP 14
Mount motor to the motor bracket. Fasten with
appropriate bolts.
STEP 10
DIAGRAM 5
DIAGRAM 6
Mount the Tensioner onto the Tensioner bracket
using one M10 bolt.
STEP 9
USE & CARE
Fan Controls:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID
STATE SPEED CONTROL DEVICE.
