600 SERIES UTILITY BLOWERS
600 SERIES_04_08_22
Page 3 o
f
4
ELECTRICAL
PULLEy ALIGNMENT
WARNING
ENSURE POWER SUPPLy IS DISCONNECTED & LOCkED OUT PRIOR TO MAkING ELECTRICAL
CONNECTIONS.
WARNING
A GROUND WIRE MUST bE CONNECTED fROM ThE MOTOR hOUSING TO A SUITAbLE ELECTRICAL
GROUND.
Before connecting the motor to the electrical supply, check the electrical characteristics and wiring instructions as indicated on the motor
nameplate or inside the conduit box cover to ensure proper voltage and phase. Complete electrical connections as indicated.
WARNING
A GROUND WIRE MUST bE CONNECTED fROM ThE UNIT ChASSIS TO A SUITAbLE ELECTRICAL
GROUND.
FIGURE 1
TABLE 1: DRIVE SELECTION
** WARNING: APPROAChING MAXIMUM WhEEL RPM
**
Basic drive selections shown above. For more drive selection options, refer to the Delair Drive Selection program.
NOTE:
For fractional HP applications “4L” belts may be substituted by adding 2” to the specified “B” belt. EG. B50 belt = 4L52
