5 Unpacking and Inspection
5
/
32
Storage temperature: –40°C ~ +70°C.
Storage humidity: 0% ~ 100%RH (Non-Condensing).
The warehouse should be clean, well-ventilated, and non-corrosive gas (corrosive or flammable gases), meanwhile
it
should be accessible all the time
.
No smoking, no illegal use of electricity and fire.
When storing inverters, do not stack more than the allowed layers to avoid damage, which number marked on the
product packaging.
Do not tilt the package or place it upside down.
Regular inspection is required during the storage.
After long periods storage, the inverters need to be inspected and tested by technical Engineer before they are put
into use.
5 Unpacking and Inspection
Before unpacking the inverter, check the package appearance thoroughly, such as for holes and cracks, and check the
inverter model accordingly. If you discover any damage to the packaging which indicates the inverter may have been
damaged, or the inverter model is not the one you requested, do not unpack the product and contact your dealer
immediately.
After opening the package, check all of the accessories carefully in the carton. If any damage is found or any
component is missing, contact your local installer.
Notice:
1)
For component details, see the packing list document in the packing case.
2)
Need two persons to carry the inverter.
6 Installation
6.1 Basic Installation Requirements
1) Do not install the inverter on the structures constructed of flammable, thermolabile or explosive materials.
2) The installation surface must be strong enough to bear the inverter's weight for a long period time. (Please check
the inverter’s weight in the product specification of Appendix B).
3) The inverter is protected to IP65, can be installed indoors and outdoors.
4) The humidity of the installation location should be below 100% without condensation.
5) The ambient temperature should be between -25°C to 60°C.
6) Install at eye-level for easy operation.
7) Do not install the inverter near television antenna or any other antennas and antenna cables.
8) Ensure the inverter is out of children's reach.
9) Install inverter at the locations with some cover or protection, to ensure the optimum operation, as per FIG.6-1.
10) Do not install in small closed cabinet where air cannot circulate freely. Do not put any other objects on the
inverter, as per FIG.6-2.