6.7.14 DSP Update
The function is used for update the DSP.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6.7.15 Compensation Set
The
screen
shows
:
Figure 6.45 Power Rate Limit
Press
the
Down
key
to
move
the
cursor
.
Press
the
Up
key
to
change
the
digit
.
Please
press
the
Enter
to
save
the
setting
and
press
the
ESC
key
to
return
to
the
previous
menu
.
This setting is used for grid operators, do not change this setting unless
specifically instructed to.
This function is used to calibrate inverter output energy and voltage. It will not impact the
energy count for inverter with RGM.
Two sections are included: Power Parameter and Voltage Parameter.
YES=<ENT> NO=<ESC>
Power
para
:
1
.
000
6. Normal operation
6. Normal operation
.59.
.58.
6.7.13 Debug Parameter
Figure 6.43
Debug
Parameter as shown as below:
This section is applicable to maintenance personnel only.
Press the UP/DOWN keys to scroll through items. Press the ENTER key to select
.
Press the DOWN key to scroll and press the UP key to change the value.
Press the ENTER key to save the setting. Press the ESC key to cancel
.
changes and return to the previous menu.
→
S16DAT1: +0000
S16DAT2: +0000
S16DAT3: +0000
S16DAT4: +0000
S16DAT5: +0000
S16DAT6: +0000
S16DAT7: +0000
S16DAT8: +0000
6.7.14 FAN Test
Figure 6.44
Selecting “Fan Test” displays the sub-menu shown below:
This section is applicable to maintenance personnel only.
Are
you
sure
?
YES
=<
ENT
>
NO
=<
ESC
>
Fan Test is a factory test function.
Press the ENTER key to start the test.
Press the ESC key to return to the previous menu.
