W I N N I P E G
W I N N I P E G
1. FILTER BASKET:
Assembly that holds the filter cartridge
(Note: configurations may differ from model to model).
2. LED SPA PILLOW:
To rest you head and neck (replaceable).
3. AIR CONTROLLER
: see Below
4. ILLUMINATED CUP HOLDER:
Placeholder for drinking
receptacle.
5. WATERFALL ON/OFF VALVE:
Located on top rail of spa
used to adjust the waterfall flow.
6.
LED ILLUMINATED SPEAKER:
Audio speaker system
for
playing music from an MP3 device
7. AROMATHERAPY:
A small canister that holds scented
beads and works in conjunction with the air control system
to create an aromatic experience.
8. AUDIO VOLUME CONTROL:
Allows control of MP3 functions
from within the hot tub
9.
TOPSIDE CONSOLE:
Button pad and temperature display
panel located on the top of the spa into which various
commands, control sequences and options for operating
the spa can be input. User can set temperature, filtration
cycle and heating mode through the console.
10. SUCTION FITTING:
Located at the bottom of the spa, used
to return water back into the filter and pump system.
11.
JET (VARIOUS):
See below
12. WATERFALL & PERIMETER LIGHTING:
To create a relaxing
spa mood.
13.
MAIN
SPA LIGHT
6
3
3
10
13
1
3
11
4
7
6
9
8
5
12
12
2
(4)
(5)
CONTROL PACK:
Unit that controls spa operations, containing
electronic programming boards, heater and all connections for
Pump(s), Light(s), Ozone Generation Unit and Topside Console.
Also referred to as ‘Spa Pack’ or ‘Controller’.
HEATER:
Electrical resistance device located in the Spa Controller
containing the heating element and 2 temperature sensors. The
flow through heater heats the spa’s water as it flows across the
heating element. Heaters are available in several wattages.
MASSAGE PUMP:
Electro-mechanical device to move water,
consisting of a wet end and a motor.
OZONE /UV GENERATOR:
Device that generates ozone to aid
in maintaining water quality. Generates Ozone and UV to help
eliminate organic material such as body oils, dead skin cells
and hair.
DRAIN VALVE:
Valve located on the outside of spa cabinet used
to drain water from the spa. A garden hose can be attached to
the drain valve.
EQUIPMENT BAY:
Located under the spa shell covered by
access panels that houses the spa controller and equipment.
SLICE VALVE:
Two-position (open or closed) sliding valve, used
to cut off water flow which allows for service to be performed
on the spa equipment without the need to drain the spa. Slice
valve operations: up for open, down (toward the valve body) for
closed.
Hot tub equipment side
Manifold
Black out insulation
Heater
Control pack
Slice valve
Pump
UV Bulb / Ozone
Manifold
2.25” Twin Roto jet
Adjustable and interchangeable jet spins
and pulsates. The jet can be removed by
turning it counter-clockwise. To replace the
jet push inward and clockwise until it clicks
into place.
3” Directional jet
Adjustable and interchangeable jet features
a directional nozzle. The jet can be removed
by turning it counter-clockwise. To replace
the jet push inward and clockwise until it
clicks into place.
3” Massage jet
Rotational and interchangeable jet which
spins to deliver a soothing massage. The jet
can be removed by turning it counter-
clockwise. To replace the jet push inward
and clockwise until it clicks into place.
2.25” Directional jet
Adjustable and interchangeable jet features a
directional nozzle. The jet can be removed by
turning it counter-clockwise. To replace the
jet push inward and clockwise until it clicks
into place.
5” (Jumbo) Directional jet
Adjustable and interchangeable jet features a
directional nozzle. The jet can be removed by
turning it counter-clockwise. To replace the jet
push inward and clockwise until it clicks into
place.
5” Massage jet
Rotational and interchangeable jet features an
internal spinner to deliver a low pressure sooth-
ing massage. The jet can be removed by turning
it counter-clockwise. To replace the jet push
inward and clockwise until it clicks into place.
Air Controller
These are located around the top of
your spa. Increase or decrease the
force of your jets by opening or closing
the air control valves.
Aroma basket cap
Open cap to place aromatherapy
beads. Close after use.
Waterfall control
Located on the topside of the spa,
this valve adjusts water flow to the
waterfall.
HOW JETS WORK
Air is mixed with the water by using the air controls to create massage(s) of varying degrees. Water flow is adjusted by simply turning
the outer face of the full sized jets. Our hot tubs have a combination of pulsating, rotating, and directional adjustable jets.
