SWIFT CURRENT SPA
(9)
PART 4:
CONTROL UNIT FUNCTIONS
Water Heater Port
Air Jet massage and
inflation Port
Air Valve
Filter Housing
Water Pump / Filter Port
Digital Spa
Control Centre
The Portable Control Unit (PCU):
Portable Control Unit Spa Functions
•
LED Display:
Once powered-up, the LED display will show the current water temperature automatically.
•
‘Temperature Adjustment’ Buttons:
Raise or lower set temperature. Pressing one of the temperature
adjustment buttons will cause the LED display to flash. When it is flashing, you can set the desired temperature.
The value will increase or decrease by 1°F/ 1°C for each press.
•
Temperature Adjustment Ranges:
86°F
- 103°F/ 30°C - 39°C
NOTE:
There may be a 3-4 degree variance
between the temperature shown on the PCU and the temperature of the spa water.
•
‘Temperature Mode’ Button:
Press this button to change from Celsius to Fahrenheit.
•
Lock Button:
Hold down for 5 seconds to lock all button functions. Repeat to remove lock.
NOTE:
It is highly
recommended that PCU buttons are locked when PCU is left unattended.
•
‘HEAT’ Button:
Once desired temperature is set press ‘HEAT’ to begin heating.
PCU Controls Digital Spa Control Centre:
Temperature
Decrease Button
Temperature
Increase Button
Lock Button
Jets Button
Heat Button
Temperature
Mode Button
LED Display
