8cm
Barneveld, Netherlands
Phone: + 31 6 51920965
E-mail: [email protected]
Website: www.comfychair.nl
Enjoy the outdoor life!
ASSEMBLY INSTRUCTIONS
Step 1 | Table leg 1
• Grab the two slats A with the four pre-drilled screw
holes on the side.
• Attach one slat B horizontally on the sides of A. Use
the pre-drilled screw holes in A as reference points.
• Place a second slat B on the A slats.
• Secure B to A with four 4x40 mm screws per slat
(two per side).
Step 2 | Table leg 2
• Take the two A slats with two pre-drilled screw
holes on the side.
• Place slat C on top of those. Use the screw holes as
reference points.
• Secure slat C with two 4x40 mm screws on each
side.
Before you start
• Carefully unpack the package and check if all
components are present.
• Required for assembly:
cordless drill, hammer and an wrench 13. The
bit for the drill machine is included in the bag of
screws.
• For the CST 400, all attachment points with screws
should be glued using the wood construction glue
provided for added stability. One tube of glue is
sufficient for three pieces of furniture.
• Due to the drying of the glue you can only coat the
chair with oil after assembling it.
33 cm
8 cm
8 cm
1x
4x
1x
4x
4x
4x
Outside
Table leg 2
Wood
Side Table
CST 400
