Canaan Avalon Made 1346, Руководство пользователя

Страница: 36 / 39

30
Enter [{"command":"asset", "parameter":"0,workmode,2"}] in the pop-up commands box, click the
button, and if "WORKMODE[2] success" is displayed in the Response, the setting is
successful. as the picture shows:
(Restart the corresponding mining machine, the setting is complete)
After the Power Mode is set successfully, you need to wait for more than ten minutes after the power is turned on, and
then set the power consumption level according to this article. In the commands box that pops up from the FMS, enter the
[{"command":"ascset", "parameter":"0,power-level-set,1"}] command, and click the
button
to configure the mining machine to the gear 1. Configure different gears of Power Mode by changing the number of
power-level-set,1 in the command, and the Response prompts set power mode level success, which means the
configuration is successful. Configure to gear 1 as shown in the figure: