CAN FO5000, Инструкция пользователя

Страница: 34 / 40

BUILT-IN GAS OVENS WITH GRILL ▪ FO Series
33
FO Series – ed. 01/2020
MAINTENANCE AND CLEANING
No specific maintenance procedures are required for the equipment except for proper and regular
cleaning.
No specific maintenance procedures are required for the equipment except for proper and regular
cleaning.
CAUTION!
Before proceeding with cleaning, make sure that the burner is turned off.
Always wait until the appliance cools down completely.
• Regularly clean the equipment, its components and accessories to ensure optimal operation
over time
• Disconnect the power supply (if any) and close the gas supply valves before each cleaning
operation or when prolonged inactivity is planned. Ensure all the knobs are always in the “off”
position at the end of use.
• Do not use steam appliances or direct water jets to clean the hob.
CAUTION!
Do not use hydrochloric acid (commercial muriatic and/or chloride-containing
detergents) on stainless steel surfaces.
CAUTION!
Do not use abrasive powder detergents that could spoil the aesthetic appearance of
the surface finish.
If some particular acidic substances (e.g. vinegar, lemon juice, etc....) remain for long periods on the
appliance, they could damage the surface creating unsightly stains which would not however
prejudice functionality of the appliance.
type of cleaning description
STAINLESS STEEL SURFACE Use a soft cloth slightly soaked in neutral specific detergent or hot
vinegar. Rinse with warm water and dry.
Note: for how to use the cleaning products follow the instructions of
their manufacturer).
GLASS SURFACES Wash with glass specific detergent and rinse to make sure you have
removed any residue of detergent. Always use soft cloths to avoid
scratching the glass surface.
KNOBS Use a soft cloth slightly soaked in neutral detergent. Ensure no
detergent infiltrates under the knobs.
Do not remove the knobs from the pin on which they are mounted.
Note: for how to use the cleaning products follow the instructions of
their manufacturer).
CAUTION!
During and after cleaning, check that no hole or slot inside or outside the equipment
presents impurities and/or obstructions.
Only for products with steel or chrome-plated iron grills: the (progressive) burnishing of the grids is a
phenomenon due to the normal use of the equipment and does not affect its performance.