33
CAN Srl
–
CU 3002
–
ENGLISH
–
Rev 1/2018
ATTENTION
–
before switching on the grill burner, open the door of the
oven and remove the grill deflector, whose use is compulsory each time
you want to use the grill functionality.
IGNITING THE GRILL BURNER
1)
(Fig. 11-12-14) Fully press the grill burner knob and rotate it to the angle with
GRILL writing (62° angle).
2)
At the same time, activate the electrical ignition device by prolonged
pressing on the button positioned on the commands front panel. The
generator will emit a rapid and repeated series of impulses.
3)
After igniting, keep the knob fully pressed for approx. 5 seconds, always
pressing to the minimum and then releasing it: this release delay is used to
heat the safety thermocouple.
If on release of the knob, the burner does not stay on, it means the thermocouple
was not sufficiently pre-heated. To solve the problem, repeat operations 1) and
2) and 3) keeping the knob pressed for longer after igniting the burner.
ATTENZIONE
–
Ignition must take place without any food or saucepans
in the oven/grill compartment
COOKING
5) Wait for a pre-heating period of approx. 5 minutes
6) Open the oven door and equipped with appropriate protection against scalding,
remove the grill and the dripping pan
7) Position any food using suitable saucepans and/or containers for oven use in
metal/ceramic or glass material
8) Re-position the grill or the dripping pan inside the oven
9) Close the door again until it comes in contact with the previously removed
extractable deflector. The oven grill compartment will therefore remain partially
open when the appliance is on.
Only use saucepan, pans and accessories expressly designed for this use, made
from materials resistant to high temperatures and suitable for contact with food.
ACCESSORIES
No accessories are planned for this type of product.
