Version v0.1
www.canchecked.de
7)
Assembly
The assembly is done in reverse order. The display should only be plugged into
the OBD socket when all the plugs on the radio and buttons are plugged in
again.
8)
First Start-up
Once everything is back in place, the display can be plugged into the OBD
socket. As soon as you turn on the ignition, the display starts.
Everything is set up in advance. But you have to select the appropriate TRI file
for your engine code. To do this, proceed as follows:
1) Tap the display once
2) On top of "Menu" then on "TRI File"
3) On the right side you select the appropriate file (see point 8)
4) Tap "Load"
5) Please check that "Can Term" is active and that "Can Speed" is set to
500kbps. If you have to change something here, the display needs to
be restarted (switch off / on)
6) With "Exit" you come back to the standard view
In addition, the “Protocol” button in the menu must be set to UDS.
9)
TRI File
The TRI file must always match the engine code. If the engine code is not listed,
please contact us ( [email protected] ).
10)
Setuping up views
The display offers maximum flexibility. A total of 10 views can be completely
customized. To get started, begin with an empty view. To do this, you tap the
display once (stop) and then tap in the middle on the left hand side - this is how
you scroll to the back. If you tap right in the middle, you scroll forward.
Let us first scroll to view 10, as it should be empty.
Here tap once (stop) and then on "Widgets" in the bar at the top. With "New
Widget" you create a new widget. The approximate position can now be
determined by tapping the new position (not swiping like on a smartphone).
At the top of the display tap on "Type" to choose from various widget types. In
addition, there are further settings for each widget type at the top right in the
bar, such as color ("color"), background ("BG"), warning ("warn"), etc.
The sensor that will be displayed is selected in the upper bar via "Sensor". Tap it
and a list of all available sensors will appear. Here you scroll through the list and
