Quickstart Guide
MFD28/32 Gen2
Be excited, here is your CANchecked display.
Developed with enthusiasm and passion, your MFD28/32 Gen2 is a small device, that gives
you full access to your vehicle data. Please read this Quickstart Guide in its enti rety. For more
detailed instructi ons, please refer to the manual.
Installati on instructi ons
You can fi nd the vehicle-specifi c
installati on instructi ons on our
homepage under "Help" or by
scanning the QR code.
Connecti on
If you have the display with the vehicle-specifi c connecti on kit, please follow the installati on
instructi ons.
There are four connecti on variants:
Variant 1
is OBD and gets igniti on plus via pin 1 of the port (BMW and VAG).
Variant 2
is OBD and can be recognised by the separate red wire.
This must be connected to 12v switched (terminal15) in the fuse box
using the fuse adapter.
Variant 3
uses the vehicle-specifi c connecti on cable (e.g. BMW).
Variant 4
uses the accessory pack. Please follow the wiring diagram below.
Use a 2A fuse for the power supply (pin A5). The ground conects to A1.
Connect Can High to pin B2 and Can Low to pin B3. To connect other
accessories, see our manual.
What is included:
•
Display incl. vent adapter/
housing
•
Connecti on cable with plugs or
vehicle-specifi c connecti on kit
•
Micro SD card (in display)
•
Micro SD to SD adapter
•
Opti onal anti -refl ecti ve fi lm
•
Micro USB to USB A cable
installati on
manual
1
