PARTS TO BE INSTALLED
rbl2013-002-015_a
TYPICAL
1. Fender reinforcement plate
2. Screws and nuts
8. Torque screws and nuts according to the follow-
ing tightening sequence:
rbl2013-002-016_a
TYPICAL
rbl2013-002-017_a
TYPICAL
PARTS
SPECIFIED TORQUE
Screws and nuts
7.5 N•m ± 0.5 N•m
(66 lbf•
in
± 4 lbf•
in
)
Antenna (LTD Model Only)
Remove label from antenna. Ensure that no label
or glue residue is left on antenna.
Install antenna on RH rear side panel, near the
back of the vehicle. Tighten by hand to a snug fit
without using excessive force.
rbl2014-003-002_a
Hang Tag and Safety Labels
This vehicle comes with a hang tag and labels
containing important safety information.
The
labels are considered permanent parts of the
vehicle and should not be removed. Hang tag is
to be removed by the owner only.
Any person who rides this vehicle should read and
understand all the information given on hang tag
and safety labels before riding.
Safety labels of several language can be chosen
by customer, according to availability.
PREDELIVERY
2014-3
25 / 41
