Can-Am Renegade 500 Скачать руководство пользователя

Страница: 42 / 144

– Ensure transmission lever is work-

ing then reset in PARK position.

– Check fuel, oil and coolant levels.
– Check for oil leaks on the engine/

gearbox and drive train compo-
nents.

– Clean headlamps, direction indica-

tor lamps and brake lamp.

– Ensure front central panel and rear

storage compartment cover are
properly latched.

– Ensure seat is properly latched.
– If you transport cargo, respect load

capacity. Ensure cargo is properly
secured to the cargo area eyelets.

– Look and feel for loose parts while

engine is off. Check fasteners.

– Ensure the path of travel is free of

persons and obstacles.

– Check operation of ignition switch,

engine start button, engine stop
switch, headlamps, taillight and in-
dicator lights.

– Check operation of direction indica-

tor switches as well as hazard warn-
ing button.

– Start engine, remove parking brake

and drive forward slowly a few feet
and apply all brakes individually to
test them.

Correct any problem you may have
found before riding. See an autho-
rized Can-Am distributor/dealer as
necessary.

___________

SAFETY INFORMATION

___________

Содержание Renegade 500

















































































































































Результаты поиска

Содержание Renegade 500

Отзывы:

Похожие инструкции для Renegade 500

Бренды по названию

Популярные бренды

Can-Am Renegade 500, Руководство оператора

Результаты поиска

Содержание Renegade 500

Отзывы:

Похожие инструкции для Renegade 500

Бренды по названию

Популярные бренды