Can-Am outlander 400 Скачать руководство пользователя страница 110

Страница: 110 / 152

GENERAL

While reading this Operator’s Guide, remember that:



WARNING

Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.



WARNING

Unless otherwise specified, engine
should not be running for all main-
tenance procedures.
Before performing any service or
inspection operation on the vehi-
cle, wait until the engine and ex-
haust have cooled down to avoid
potential burns.



WARNING

Should removal of a locking device
(e.g. lock tabs, self-locking fasten-
ers, etc.) be required when un-
dergoing

disassembly/assembly,

always replace with a new one.

The following covers the maintenance
items that can be performed by the
customer if desired.

Other items

found

MAINTENANCE

CHART

must be performed by an authorized
Can-Am dealer.

NOTE:

Among other things, this sec-

tion gives the procedures to replace
the liquids. Refer to

LIQUIDS

for pro-

cedures to check levels and refill.

108

_____________________

Содержание outlander 400

























































































































































Результаты поиска

Содержание outlander 400

Отзывы:

Похожие инструкции для outlander 400

Бренды по названию

Популярные бренды

Can-Am outlander 400, Руководство оператора

Результаты поиска

Содержание outlander 400

Отзывы:

Похожие инструкции для outlander 400

Бренды по названию

Популярные бренды