Can-Am outlander 400 series Скачать руководство пользователя страница 99

Страница: 99 / 156

To add oil, remove dipstick. Place a
funnel into the dipstick tube to avoid
spillage.

Add a small amount of recommended
oil and recheck oil level.

Repeat the above procedures until
oil level reaches the dipstick's upper
mark.

Do not overfill.

Properly tighten dipstick.

Engine Coolant

Recommended Coolant

Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.

Cooling system must be filled with
BRP premixed coolant (P/N 219 700
362) or with distilled water and an-
tifreeze solution (50% distilled water,
50% antifreeze).

Coolant Level



WARNING

Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.

Remove access panel.

V07A0BY

TYPICAL

With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.

NOTE:

When checking level at tem-

perature lower than 20°C (68°F), it
may be slightly lower than MIN. mark.

Add coolant up to MAX. mark if re-
quired. Use a funnel to avoid spillage.

Do not overfill.

Properly reinstall and tighten filler cap
and reinstall access panel.

If the coolant is added in the coolant
reservoir, check the level in the radia-
tor too. Add coolant if necessary.



WARNING

In order to avoid getting burned,
do not remove the radiator cap if
the engine is hot.

NOTE:

A cooling system that fre-

quently requires coolant is the in-
dication of leaks or engine prob-
lems.

See an authorized Can-Am

ATV distributor/dealer.

_____________________

Содержание outlander 400 series





























































































































































Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды

Can-Am outlander 400 series, Руководство оператора

Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды