Can-Am Outlander 400 EFI 2009 Скачать руководство пользователя страница 143 | Manualshive

Страница: 143 / 160

background image

2) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:
• Normal wear and tear;
• Routine maintenance items, tune ups, adjustments;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the Operator's Guide;

• Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP or
resulting from repairs done by a person that is not an authorized servicing BRP
dealer;

• Damage caused by abuse, abnormal use, neglect or operation of the product

in a manner inconsistent with the recommended operation described in the
Can-Am ATV Operator’s Guide;

• Damage resulting from accident, submersion, fire, theft, vandalism or any act

of God;

• Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

• Water or snow ingestion;
• Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

3) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT THEY
CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND
CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER
THIS WARRANTY. SOME STATES/ PROVINCES DO NOT ALLOW FOR THE
DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS
A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

Neither the distributor, any BRP dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforce-
able against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

_____________________

141

«
...
141
142
143
144
145
...
»

Содержание Outlander 400 EFI 2009

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Outlander 400 EFI 2009

Бренд: Prophete Страницы: 116

Бренд: pronovost Страницы: 28

Бренд: PRONAR Страницы: 138

Бренд: Dynacraft Страницы: 31

Бренд: KTM Страницы: 197

K2 QUAD 250 - SERVICE

Бренд: GAS GAS Страницы: 64

Бренд: Parklands Страницы: 66

Бренд: Humbaur Страницы: 36

PRO HAULER YXP700

Бренд: Yamaha Страницы: 92

Бренд: Yamaha Страницы: 158

Бренд: Suzuki Страницы: 136

Бренд: U-Line Страницы: 8

Бренд: ODES Страницы: 92

Бренд: Kolpin Страницы: 127

Ride-N-Rest RR605B

Бренд: Great day Страницы: 3

Talon 150 DLX Series

Бренд: Carter Страницы: 81

INTERCEPTOR GTR 250

Бренд: Carter Страницы: 109

Бренд: Massimo Страницы: 167

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды