Can-Am MAVERICK X3 Series 2017, Руководство оператора

Страница: 46 / 155

SECONDARY CONTROLS
WARNING
Rollovers, tipovers, collisions and
loss of control resulting in seri-
ous injury or death are possible
with the performance or learning
keys. Using the normal key is not
a substitute for the operator being
prepared, qualified, and operating
with care.
Learning Key
The vehicle is delivered with a learning
key.
The learning key limits engine torque.
It also limits the vehicle speed to
70 km/h (43 MPH).
WARNING
On steep downhills, the engine
speed limiter may not prevent the
vehicle from accelerating beyond
this speed.
This key may be useful for riders who
prefer more gradual acceleration, or
for riding in environments where full
speed and high acceleration are not
desirable. For example, in narrow,
winding trails, operators may prefer
the learning key.
Performance Key
The vehicle is delivered with a perfor-
mance key, which allows the user to
access the full torque of the engine as
well as the top speed of the vehicle.
This may be useful for riders who pre-
fer greater acceleration, and for envi-
ronments where higher speeds and
greater acceleration are appropriate.
For example, in wide-open, straight
trails, operators may prefer the perfor-
mance key.
2) Engine Start/Stop
Button
The engine start / stop button is located
on the upper console. When pressed
and held, it starts the engine.
NOTE: The RF D.E.S.S. key must be
installed on the RF D.E.S.S. post to al-
low engine start.
To power up the electrical system with-
out starting the engine, refer to
WAK-
ING UP THE ELECTRICAL SYSTEM
219001761-076_a
1. Engine start / stop button
3) Low/High Beam
Headlight Switch
The low/high beam headlight switch is
located on the LH side of dashboard.
219001761-011_a
TYPICAL
1. Low/High beam headlight switch
This switch is used to select either the
headlights low or high beams.
44
______________