CAMXTOOL I-X-21 F, Руководство пользователя

Страница: 6 / 8

1. Before the first use, please inject warm water/alcohol
into the water bottle to clean the inner wall of the gun.
After cleaning, inject clean water and shoot, keep it 2 to 3
times. After the clean water is emptied, empty it and air dries
the internal pipes.
2. The products used by the spray gun must be
water-soluble products (products with high concentration and
strong viscosity must be diluted with mineral water/purified
water before use).
3. Every time change the liquid in the replenishment
bottle/spray gun has not been used for a long time, please
follow the steps in point 1.
4. The liquid in the spray gun should not stay for a long time,
and the liquid will not be left after the same injection. (Avoid
blockage/leakage due to prolonged liquid retention in the
refill bottle and spray gun.
5. When using the spray gun for the first time, please use it
after fully charging. (The red light of the machine is flashing
when charging, and it is always on when fully charged)
6. The machine cannot be used when charging, and the
machine can be used normally only after unplugging the
power supply.
7. Please use a qualified power adapter with an output of
more than 5V-IA for charging.
8. Low battery reminder function, when the product has no
battery, the battery icon flashes five times to shut down.
Troubleshooting
If the liquid does not come out smoothly, please check
whether the following problems occur:
1.
If the nozzle is not screwed in place, the liquid that comes
out of the spray gun mouth cannot be misted or not sprayed.
Precautions Precautions