Tel: 01246 571 020 Fax: 01246 571 030
Email: [email protected]
4” Inlet
18
Unpacking
The GV336 vacuum is shipped in one carton.
Additional to the machine in the carton will be ( if ordered ) 2.5 metre 4” clear
steel reinforced Urethane vacuum hose, it should be noted that Urethane hose has
a life expectancy of 5 to 10 times the life of conventional PVC hoses.
Any of the Camvac machines supplied with a 4” inlet can be successfully reduced
down to accept a 2.5” tool kit.
Setting Up Your Vacuum
Since the unit comes completely assembled, it is very simple to put into operation.
The following steps should be taken after unpacking:
1. Ensure that the elasticised drum filter is in place around the top lip of the drum.
2. Replace lid and lock with toggle clamps.
3. Slip flexible hose into the intake opening.
4. Your vacuum is ready for use.
Motor
The vac motor supplied is a highly efficient, ball bearing type design for intermittent
use and DRY pick up only. Standard rating is for 230/240V, operating on a 50/60 cycles
AC supply and developing 1.3 HP/ 1100W. Each motor is rated at 1kW and will require to
be turned off for 10-15 minutes after 2 hours of use.
Fuse ratings are as follows: - 1000W ( single motor ) = 7Amp. 2000W ( twin motor )
= 9 or 10 Amp.