Camus Hydronics DMC 753, Инструкция по установке, эксплуатации и обслуживанию

Страница: 37 / 76

33
Appliance Settings
Changes boiler characteristics. The User level will have
access to the first screen inside Appliance Settings which
allows for changes in Central Heating setpoint. A 4-digit
personal identification number (PIN) needs to be entered
before moving further into the controller. If an incorrect
PIN# is entered this will result in an error displayed on
screen.
Errors
Displays the lockout or error code along with a description
of the error.
9.3 SYSTEM MONITOR DISPLAY
Figure 54: System Monitor
From MENU display;
1) Use [NEXT] to select ‘System Monitor’
2) Press [ENTER]
Table 28: System Monitor Display Readout
DISPLAY
READOUT
DESCRIPTION
MASTER
Boiler is designated as a
Master boiler in the cascade
setup
Active
Program
SLAVE
Boiler is designated as a Slave
boiler in the cascade setup
ON Pump is active
PUMP
OFF Pump is inactive (idle)
Standby
Heating and DHW Request (if
equipped) is satisfied
STATUS
##%
Boiler is firing at the rate
indicated
When no action is detected for 30 seconds, the screen will
default back to the Temperature and Status Display.
Central Heating Display
Figure 55: Central Heating
From SYSTEM MONITOR display;
2) Use [NEXT] to view CENTRAL HEATING display.
Table 29: Central Heating Readout
DISPLAY
READOUT
DESCRIPTION
Outd
Outdoor Temperature (if
equipped)
In
Return/Inlet Temperature to
Boiler
Out
Supply/Outlet Temperature to
Boiler
Setp
Central Heating Setpoint
CENTRAL
HEATING
Flue
Flue Temperature
Domestic Hot Water Display
Figure 56: Domestic Hot Water
From CENTRAL HEATING display;
3) Use [NEXT] to view DOMESTIC HOT WATER
display.
Table 30: Domestic Hot Water Readout
DISPLAY
READOUT
DESCRIPTION
DHW DHW Temperature
In
Return/Inlet Temperature to
Boiler
Out
Supply/Outlet Temperature to
Boiler
Setp Central Heating Setpoint
DOMESTIC
HOT
WATER
Flue Flue Temperature
System Display
Figure 57: System
From DOMESTIC HOT WATER display;
1) Use [NEXT] to view SYSTEM display
Table 31: System Display Readout
DISPLAY
READOUT
DESCRIPTION
Sys
System Temperature of
Primary Loop
In
Return/Inlet Temperature to
Boiler
Out
Supply/Outlet Temperature to
Boiler
Setp Central Heating Setpoint
SYSTEM
Flue Flue Temperature