Cywatch, CTNC-5353H User Manual (Ver. 1.0)
CamTron Industrial Inc.
9
2
Installation
2.1
Connecting Network(LAN)
onnect LAN and there is a Video output to check video quality.
udio is bi-directional in any configuration. If necessary, it can be configured to be in
bi-directional mode.
e or speaker with amplification function
2.3
Serial Ports
he serial port(RS-485) in CTNC-5353H can be connected to external equipment such as
send PTZ commands to the external equipment via
onnect sensor and alarm devices to corresponding terminals accordingly.
fter confirming the power source, connect power adaptor and connect the 12VDC
c
the system will boot up to an operating mode.
s soon as the power is supplied to the system, it will boot and, after about 30 seconds, the
tion.
C
2.2
Connecting Audio
A
transmit-only, receive -only or
- Connect audio input and output ports to audio devices accordingly.
- Audio signal is in line level, therefore, microphon
should be used.
Connecting
T
PTZ receiver etc. Then, PC client can
serial port. When a decoder system instead of PC client is connected to CTNC-5353H, the
serial port of CTNC-5353H and that of the decoder system works in pass-through mode.
That is, data at one port are delivered to the other port, vice versa.
2.4
Connecting Sensor and Alarm
C
2.5
Connecting Power
A
conne tor to the system. Soon
2.6
Check if It Works
A
system will be ready for opera
