4) Slide Camtroller Lanc connector through the ACG and out the hole in the side of
the ACG
Camtrol Video Camera Stabilizing Quadpod User’s Manual
6
Figure 3 Installation of Camtroller Cable
Slide connector
and cable in the
opening of the
ACG
Slide connector
out the opening
in the side of
the ACG
E- Set Up Instructions For Installing Wired Remote
( Continued )
5)
Install Camera onto Camtrol Landing Pad by installing thumb screw into tri-pod mount
on camera.
6)
Ensure thumb screw is finger tight so camera does not slip
7)
Plug Connector into camera Lanc port
8)
Feed cable back into handle but leave enough excess so that camera can easily
be
rotated to the positions listed below.
7. Install Cam-
troller cable into
LANC port on
8. Route cable
approximately
as shown
6. Install thumb
screw into tripod
mount
Figure 4 Connecting Camtroller cable to camera
Continued on next page….