2
Insert french flag to the top of Matte Box and
tighten it with screws. Using the same
approach, insert side flags into matte box
and tighten the screws.
NOTE:
The filter holder supports the use of 4x4” square filters, kit includes 2pcs of filter holders, one is
rotating 180° and another is non-rotating.
Matte Box
Setup
Attach knicker on conversion ring, then
attach ring with conversion ring holder and
tighten the knot.
You can easily insert filter holders as shown
in the image.
Pulling the knob upwards releases the MB-20
Matte Box allowing it to easily swing away
from the camera.
YOUR MB-20 SWING AWAY WIDE ANGLE MATTE BOX
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
