Camtech CMDC270S, Инструкция по эксплуатации

Страница: 17 / 25

COLOR
(1~8)
Sets the colors of the privacy zones.
TRANSP
(0.00/0.50/0.75/1.00)
Sets the transparency of the privacy zone area if color is selected.
MOSAIC
(ON/OFF)
Sets the mosaic function as the privacy to ON or OFF.
(Note: when ON, transparency needs to be set at 0.00 and privacy zones
can only be 1 color OR mosaic and not mixed)
DAY/NIGHT
AUTO
BURST
(ON/OFF)
Allows the color burst signal in monochrome to be removed if required.
DELAY CNT
(0-255 secs)
Sets the hysteresis time before switching between color/mono &
mono/color, to reduce the ‘hunting’ effect.
DAY->NIGHT
(0-255)
Sets the threshold for switching from day to night operation.
NIGHT->DAY
(0-255)
Sets the threshold for switching from night to day operation.
COLOR
(color only operation)
B/W
(monochrome only operation)
BURST
(ON/OFF)
Allows the color burst signal in monochrome to be removed if required.
IR OPTIMIZER
(OFF / ON)
Smart IR mode OFF or ON
MODE
(ONLY IR OPTIMIZER ON, AUTO / CENTER)
Auto : Histogram integration mode
Center : Center priority mode
LEVEL
(ONLY IR OPTIMIZER ON, 0~31)
NR (2D-DNR)
This is used to remove noise from the image in low light conditions when
AGC is applied.
NR MODE
(OFF, Y, C, Y/C)
Sets the 2D NR filter mode.
Y LEVEL
(0-15)
Sets the Y filter (Luminance) strength.
C LEVEL
(0-15)
Sets the C filter (Chrominance) strength.
11