HSEUREG07201(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany
P.4/10 (03.2022.00.0)
Phone +49 (721) 46596-0 - Fax +49 (721) 46596-77 –
www.camtec-gmbh.com
-
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Manual und Technical Details
Programming Time Vout [ms]
Model
0-15V
0-30V
0-50V
0-90V
0-130V
0-180V
Rise Time 0-100%, 10/100% Last, [ms] typ.
15/15
15/15
15/15
15/15
15/15
15/15
Slew Rate 90-10%, 10/100% Last, [ms] typ.
36/3.6
104/10.4
49/4.9
57/5.7
53/5.3
100/10
Output Capacity, [mF] typ.
10.36
10.36
1.85
0.64
0.28
0.28
Interface Latency
15ms including signal latency for 0-Umax programming
Analog Interface
Pin
Name
Type
Function
Signal
Remarks
1
Ureg +
Input
Voltage Programming
0-10Vdc/20mA & 0-20mA
multi-functional interface
500
Ω
working resistance with voltage
programming
2
Ureg -
Input
3
Sense +
Input
Sense Control
none
Compensation max. 2V per load line
4
Sense -
Input
5
Input
External Shutdown Remote
ON/OFF
Open Collector or Switch
Voltage drop <1V with typical 2.3mA
6
Remote -
Input
Programming Interface Ureg
The standard programming of the HSEUREG Series is an analogue
interface. The output voltage is linearly proportional to the adjusted analogue
control signal. If the control signal 0V applies the power supply delivers 0V at
the output. The power supply is already working from 0V output voltage and
low load with high precision.
The analogue inputs are non-floating. The mass is connected to the DC
negative output. The burden of the interface is 500
Ω
. 0-10V programming
requires 20mA current. The latency to full compensation of V/C on the
interface from 0-100% is typically 15ms for all HSEUREG models.
C
O
N
V
E
R
T
E
R
F
I
L
T
E
R
P
I
D
C
O
N
T
R
O
L
C
T
1 = transient filter
2 = rectifier
3 = inrush limiter NTC
4 = load capacitor
5 = transformer
6 = storage choke
