CAMSPORTS EVO PRO 1080 - User Manual - English
2
Technical specifications:
FEATURES
EVO PRO 1080 FULL HD
Diameter
Diameter 24mm, length 85mm
Weight
60 g
Sensor
5 Mp
Resolution
1920x1080P@30fps
1280x720P@60fps
Angle
135°
Pointing laser C2
Yes
Audio
mono
Compression
H.264, 12Mbit/s
LI-PO Battery
660 mhA
Memory
TF card up to 32 Gb, class 4 minimum
Record capacity
60 minutes / 6 Gb
Battery duration max.
Up to 70 min
Charging cycles
500
Working temp.
-20° to +55°
Special features:
-
Full HD 1920x1080 30 fps and SLOW Motion 720p 60 frames/seconde
-
Recording warning by laser targeting and body vibration
-
Advanced settings using a unique setup text file on the root of TF/SD card
-
Easy connection with PC/Laptops/Mac, no driver needed
-
Single START/STOP friendly operation button for easy control
-
Choice of audio rear covers: open for low-noise sports (not waterproof) or closed for high-
noise environments
Using your LASER pointing device (please read the safety information):
The laser pointing device indicates the centre of the picture you are taking. It will come on for 10
seconds when you start recording and then go out automatically. To switch the laser back on while
recording, quickly press and release the record button. To switch it back off, press the record button
again.
Parts:
1 – microphone
2 – start/stop record button
3 – LED light indicator
4 – silicon o-rings
5 – rear cover
6 – reset button
7 – LED charging indicator
8 – mode select 1080/30 - 720/60
9 –mini USB connector
10 –micro TF/SD card slot
11 – wide angle lens 135°
12 – laser positioning device
Special part: the rear cover
Your CAMSPORTS comes with 2 rear covers that
can be fitted according to the conditions of use:
Cover with mic-hole (A)
: for use in low-noise environment during almost all outdoor sports (except
water sports) : biking, trekking, horse riding, etc.
Cover without mic-hole (B)
: makes the camera water resistant to IP68 and protects the microphone
in high-noise environments: motor biking, go-karting, high speed sports, etc. With this cover, the
microphone is fully covered and only records filtered sounds.
How to use the rear covers:
Before use, ensure the 2 rubber rings (4) are fitted correctly. Then,
screw the cover back on tightly so that only about 0.3-0.4 mm of
the seal (6) is visible. (tightening torque around 1 kg)
