CAMSO TTS 30 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 28

CAMSO TTS 30 Series Скачать руководство пользователя страница 8

CPB-516 Operation and Maintenance Manual – TTS 30-40-45 Series (excluding 45-1814) (01-2020)

8

Frame

The main frame consists of a weldment or casting which hangs the front alignment

assembly and rear tension link. The front alignment yoke and rear tension link are cast

members, allowing for close tolerance machining and structural rigidity.

Axles

Front and rear axles are machined from the yoke castings, allowing for dimensional

stability and few moving parts. They feature oil bath hubs mounted on tapered bearings

and mechanical seals for extreme working conditions. Each hub has its own oil reservoir

with access port for maintenance and checking oil levels.

Idlers and Midrollers

The idlers have the function of guiding the rubber track by acting on the lateral surfaces of

the guide lugs. The midrollers distribute the majority of the machine weight to the ground.

They are mounted on pivoting arms connected to the frame reducing vibration and shock

loads.

Tensioning system

The tensioning system is located between the 2 rear idlers. The tension force is provided

by a mechanical spring mechanism. Track tension is provided by the spring and does not

need adjustment during operation and changing field conditions. Provisions are made to

compress the spring allowing for removal of idlers and track assemblies during

maintenance and servicing.

Rubber track

The rubber tracks are manufactured with high quality rubber and high strength steel

cabling inside for superior durability and reliability. The tread layout ensures good

flotation, excellent life, and self-cleaning characteristics.

«
...
6
7
8
9
10
...
»

Содержание TTS 30 Series





























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды