ASSEMBLY:
Mount transmitter on a stable basis using screws. Screw antenna or antenna
wire into antenna port SMA. Place antenna in direct visibility of receiving
point to get best possible quality of transmission. (Note: Transmitter`s an-
tenna has to be in a line of sight of receiver`s antenna). Mount receiver ac-
cording to above instructions.
Connect video signal cables and power supply cables according to descrip-
tions on the PCB. Set required channel according to the Table below. The
polarity and channel number must be same for both interacting trans-
mit/receive devices. There is the adjusting potentiometer within transmitting
part for setting the video-contrast, which enables proper matching of signal
source connected.
RECOMMENDATIONS :
1.
Bigger systems, using more then one set should be started one after another (not
all in the same time)
.
2. Due to causing clutter we do not recommand using pulse power supply
adaptors different to the one recommended by manufacturer f.e. ZS12/1A.
3. Recommended power supply adapter: transformer, stabilized, 12V not less
than 0.5A
4. Lenght of video cables (75ohm)
≥
50m.
5. We do not recommand connecting transmitter and receiver to one power
supply adaptor. Connecting a few receivers to one power supply adaptor or
a few transmitters to one power supply adaptor is allowable.
V- video signal input A.2 - Audio in of channel 2
GND –video signal minus GND – power minus
A.1- Audio in of channel1 1 + 12V – power supply 12V
WARRANTY:
CAMSAT grants 24 months warranty for 5.8GHz transmitting – receiving set
named TCO5807m.
1.
The warranty covers product’s defects caused by faulty components or
workmanship.
2.
The product must be delivered to sales point or to manufacturer directly,
along with proof of purchase, problem description and this warranty
card. Shipping costs are to bear by claimer of complaint.
3.
Defects disclosed during warranty period shall be removed free of
charge within no longer than 14 working days from the date of delivery
of claimed equipment.
4.
The Warranty does not cover:
ASSEMBLY:
Mount transmitter on a stable basis using screws. Screw antenna or antenna
wire into antenna port SMA. Place antenna in direct visibility of receiving
point to get best possible quality of transmission. (Note: Transmitter`s an-
tenna has to be in a line of sight of receiver`s antenna). Mount receiver ac-
cording to above instructions.
Connect video signal cables and power supply cables according to descrip-
tions on the PCB. Set required channel according to the Table below. The
polarity and channel number must be same for both interacting trans-
mit/receive devices. There is the adjusting potentiometer within transmitting
part for setting the video-contrast, which enables proper matching of signal
source connected.
RECOMMENDATIONS :
1.
Bigger systems, using more then one set should be started one after another (not
all in the same time)
.
2. Due to causing clutter we do not recommand using pulse power supply
adaptors different to the one recommended by manufacturer f.e. ZS12/1A.
3. Recommended power supply adapter: transformer, stabilized, 12V not less
than 0.5A
4. Lenght of video cables (75ohm)
≥
50m.
5. We do not recommand connecting transmitter and receiver to one power
supply adaptor. Connecting a few receivers to one power supply adaptor or
a few transmitters to one power supply adaptor is allowable.
V- video signal input A.2 - Audio in of channel 2
GND –video signal minus GND – power minus
A.1- Audio in of channel1 1 + 12V – power supply 12V
WARRANTY:
CAMSAT grants 24 months warranty for 5.8GHz transmitting – receiving set
named TCO5807m.
1.
The warranty covers product’s defects caused by faulty components or
workmanship.
2.
The product must be delivered to sales point or to manufacturer directly,
along with proof of purchase, problem description and this warranty
card. Shipping costs are to bear by claimer of complaint.
3.
Defects disclosed during warranty period shall be removed free of
charge within no longer than 14 working days from the date of delivery
of claimed equipment.
4.
The Warranty does not cover:
www.cctvireland.ie
Lo-Call 1890 866 900
