Camsat iCAM-Mobile HD II, Руководство пользователя

Страница: 31 / 44

7.2. Configuring the recorder
After logging into the system, go to the CONFIGURATION tab to perform the basic confi-
guration of the device.
A) TCP / IP configuration (IP address settings)
Configuration of LAN parameters is done in the Config > Network Parameters > Network
Settings.
Enter a new IP address for the device from the same subnet as the computer and came-
ra, Subnet Mask, Gateway (entering the gateway IP address is only necessary if the devi-
ce needs access to the module from outside the local network) . Remember to set a uni-
que IP address (each device and module must have a unique IP address). The subnet
mask and gateway should be identical throughout the local network. The changes are
confirmed with the Save button.
B) Connection with an IP camera
The camera can be connected to the recorder module in two ways: by modifying the IP
camera settings to the default settings of the recorder or by modifying the configuration
of the recorder itself.
Before changing settings, make sure that the camera's IP address is in the same subnet
as the recorder module and computer.
OPTION A. Configuring recorder settings
Ato connect the IP camera with the recorder module, go to the Config > Channel Para-
meters > LAN Search. All relevant parameters regarding the configuration of the video
channel should be supplemented.
•
Protocol - Recommended Onvif protocol if supported by the camera.
•
IP - Camera IP address. It must be on the same subnet as RECORDER.
•
Port - The port number on which the camera supports Onvif.
•
User - Username used to log in.
•
Password - User password.
Page 31