Camsat GlobalCAM-LTE, Руководство пользователя

Страница: 7 / 16

Preparation for work of the device
It is recommended that the first start-up and configuration of the system be carried out
in a workshop environment over short distances. This can save a lot of valuable time
when configuring many different cameras on the site.
1. Remove the bottom cover, and then insert the SIM card that you have received
from your cell phone operator.
We recommend a SIM card with a fixed IP address and no data limits, e.g. CAMSAT
cards "simCAM" - more at www.camsat.com
2. Connect the 9-48V DC power supply to the power contacts in the green EDG con-
nector. Select the appropriate contacts depending on the voltage used.
3. Connect the computer with the network cable to the LAN port 1.
4. Wait for the device to start up until the red Status LED stops flashing.
Basic configuration
1. Log into the GlobalCAM-LTE transmitter from a computer with a set IP address
from the same subnet. Default IP address:
192.168.1.234 , password: camsat
2. Go to Step 1 - CONFIGURATION> Basic
a) Enter the correct PIN code, APN access point name, user name and password
received from your network operator. If you do not need to configure some
items leave the fields empty.
Set the target IP address of the GlobalCAM-LTE transmitter with the correspon-
ding subnet mask. Enter the address of the GlobalCAM-LTE transmitter in the
default gateway address field in the configuration of all network devices that
will use the Internet through this device (IP cameras, recorder, etc.).
b) Confirm the configuration with the Save changes button, and then restart the
device.