Plug the power cord with RJ45 to
LAN
connector in CDS-6IP/SMA module (A) and the other end to
the connector labeled
POE
in the supplied power adapter (B).
Connect the computer IP camera or recorder to the
LAN
connector on the AC adapter by network
cable.
CDS-6IP/SMA has an additional 12V DC power supply input (power socket 2.1 / 5.5 mm).
Most IP cameras are also supplied with 12V DC by which the devices can be easily supplied from the
buffer power supply 12V - 13.8V DC.
3. Connection of CDS-6IP/SMA radio module to power (three options).
Option 1
- directly from the included AC adapter PoE24V.
Option 2
- Power supply for the camera and CDS-6IP / SMA from a single
source 12V.
Option 3
- power supply for radio module and a camera with a PoE48V Switch
by additional PoER-24 converter (optional with an additional module
CAMSAT PoER-24, PoER-24h)
4. Connecting to a computer.
Connect the radio module to the computer LAN adapter with IP address set at 192.168.1.XX
(eg. 192.168.1.99)
QUICK START
Power
Socket
LAN
LAN
PoE 48V
LAN
PoE 48V + LAN
PoE 24V + LAN
LAN
LAN+PoE24V
12-24V DC
POE
LAN
ANTENNA
SMA (H)
ANTENNA
SMA (V)
ANTENNA
SMA (H)
ANTENNA
SMA (V)
Power Socket
ANTENNA
SMA (H)
ANTENNA
SMA (V)
1
2
3
4
PoE
C
C
A
B
D
A
C
D
B
B
A
Connecting the CDS-6IP/SMA module without connecting an external antenna may result in
damage to the device, which is not covered by the warranty. If you use the CDS-6IP/SMA module
adjust the output power of the device, adjusting it to gain of used antenna. EIRP power must not
exceed the permissible power, as described in the regulation of the country, in which you are. If
you are not sure what settings to use, consult your supplier. Power adjustments can be made
through the web panel.
Connect the antenna cables gently to the antenna terminals on the unit and in the antenna.
Close the protective cover precisely and remember to cut out the holes for additional cables.
NOTE:
Askew screwing the antenna cables may permanently damage the SMA socket.
NOTE:
Please pay special attention to the type (male / female) of SMA connectors used in the RF
cable.
WARNING
Full instructions can be found at www.camsat.com and on the CD
2
3
Full instructions can be found at www.camsat.com and on the CD
www.camsat.com