Camsat CAM 5816h Multi-Rx, Руководство пользователя

Страница: 2 / 5

Connectors:

GND – audio signal minus

GND – power minus

A-L - Audio left channel

A-R - Audio right channel

+12V - power plus; 9-14V, minimum 800mA
Recommendations:

When mounting several transmitters in one monitoring system, be sure
to start them in sequence. After a precise set of antennas, connecting power
supply to the first transmitter and obtaining the proper transmission connect power
to
next transmitter. It is not recommended to connect power to all
devices simultaneously.

For transmission over short distances (50 to 500m), it is recommended
to use larger spacing between operating channels such as 1-2-6-8 or 1-3-7-8.

Recommended power supply: stabilized 12V 800mA transformer

It is forbidden to connect the receiver and transmitter to one common power supply
adaptor, which may result in improper video transfer . One common power supply
adaptor is acceptable for several transmitters and multiple receivers.
NOTE:
Receiver`s antenna must be in “line of sight” with transmitter`s antenna. The
receiver should be mounted high enough, at least 4 meters above the
highest obstacle over the radio transmission path. Antenna`s polarization and number of
channel should be same in two cooperating devices. Each CAM5816 transmitter has a
potentiometer to adjust the video signal level - that allows proper fit to connected signal
sources. The frequency of each video output can be set by DIP switch according to the table.
Manufacturer:
CAMSAT Gralak Przemysław
Ul. Ogrodowa 2a
86-050 Solec Kujawski
Offer and infrmation:
www.camsat.com
Service:
serwis@camsat.com.pl