![background image](http://html.mh-extra.com/html/camry/premium-cr-7045/premium-cr-7045_user-manual_490741006.webp)
6
13. Sponge filter
14. Cover for blower
15. Cover for air outlet dust filter
16. Crevice nozzle
17. Plastic hose
18. Metal hose for ash
19. Aluminum nozzle for ash
20. Fire-retardant cotton filter
21. Sofa brush
22. Horse hair round brush
23. Tool adaptor
24. Wet & dry floor brush (industry)
25. Wet & dry floor brush (home)
26. Paper bag
27. Construction gasket
Assembly: Picture C
1. Press 4 wheels (10) onto the holes of the base (9).
2. Insert the plastic hose (17) into the suction port (3) and turn it clockwise.
3. Insert the handle on the plastic hose (17) into the telescopic tube (11).
4. Press the button on the telescopic tube for extension.
5. Insert the telescopic tube into the brush (24 or 25) , or other accessories (21 or 22 or 23 or 16).
6. In the main cover (7) there are 2 covers for your choice for assembly:
a. Dry and wet clearing function: Fit the cover of dust (15) on the back of the main cover (7) for filtering escaping motes.
b. Blower function: Fit the cover of blower(14) on the back of the main cover (7), and insert the plastic hose (17) into it, before starting the
blower. Blower helps to make order with fallen leaves in your garden or it helps to clean difficult to reach corners from dust.
8. Assemble suitable filters and accessories according to description in the chapter: Operation and close the main cover (7) by metal clips
(8).
9. Pull out the drainage plug (5) for pouring out the liquid wet waste after use.
OPERATION
Before operating this device, please make sure that the corresponding filters are fitted properly according to desired purposes.
Press the switch (1) to position “I” to switch on the device, press the switch (1) to position “0” to switch off the device. The position “II” is
only used when the other electric construction tool: e.g. wall sander had been plugged into the vacuum cleaner.
Once the stainless steel container (4) or paper bag (26) is full we recommend the container to be emptied and cleaned and the bag
replaced, also the filters should be cleaned.
Function 1: Car / Upholstered furniture cleaning
Under the main cover (7) assemble the HEPA filter (12) and put the construction gasket (27) on the edge of stainless steel container (4).
The dust will be collected to the stainless steel container (4) directly. For this function use one of accessory: crevice nozzle (16), sofa brush
(21) or Horse hair round brush (22) and plastic hose (17).
Function 2: Construction dust cleaning – 2 alternative methods are available:
a) Under the main cover (7) assemble the HEPA filter (12) and fire-resistance cotton filter (20). The dust will be collected to the stainless
steel container (4) directly.
b) Under the main cover (7) assemble the HEPA filter (12) and fire-resistance cotton filter (20) as well as put the paper bag (26) on the
suction port part located inside the stainless steel container (4). So, the dust will be collected to the paper bag for comfortable throwing
away reducing the quantity of dust motes in air.
For this function is recommended to use the wet & dry floor brush (24) and stainless steel telescopic tube (11) with the plastic hose (17).
Function 3: Large space vacuuming – 2 alternative methods are available:
a) Under the main cover (7) assemble the HEPA filter (12) and fire-resistance cotton filter (20). The dust will be collected to the stainless
steel container (4) directly.
b) Under the main cover (7) assemble the HEPA filter (12) and put the construction gasket (27) on the edge of stainless steel container (4),
as well as put the paper bag (26) on the suction port part located inside the stainless steel container (4). So, the dust will be collected to the
paper bag for comfortable throwing away reducing the quantity of dust motes in air.
For this function is recommended to use the wet & dry floor brush and stainless steel telescopic tube (11) with the plastic hose (17). The
wet & dry floor brush (24) is designed for industry / commercial cleaning services as the suction power of this brush is higher. For home use
is available the wet & dry floor brush (25) suitable for the carpet cleaning also.
Function 4: Collecting the ash from fireplace
Under the main cover (7) assemble the HEPA filter (12) and fire-resistance cotton filter (20). The ash will be collected to the stainless steel
container (4) directly. For this purpose is need to use the metal hose for ash (18) and Aluminum nozzle for ash (19).
REMARK: Do not use this equipment for cleaning the ash when its temperature is higher than 45
℃
, or when the residues of wood are still
glowing!
Function 5: Wet cleaning
Under the main cover (7) assemble the sponge filter (13) and put the construction gasket (27) on the edge of stainless steel container (4)..
The wet waste will be collected to the stainless steel container (4) directly. The paper bag (26) is not advised for wet cleaning. For this
function is recommended to use the wet & dry floor brush (24) and stainless steel telescopic tube (11) with the plastic hose (17).
Содержание Premium CR 7045
Страница 2: ...2 PICTURE A PICTURE B ...
Страница 3: ...3 C 7 PICTURE C C 1 C 2 C 3 C 4 C 5 C 6a C 6b PICTURE D ...