camry Premium CR 6311, Дополнение к руководству пользователя

Страница: 6 / 120

Before first use.
Programs:
2. Thoroughly clean the basket (2) and pot (6) with hot water, a little washing-up liquid and a soft sponge, then wipe them with a
clean, soft cloth.
(Do not clean the device with abrasive cloths or sponges, or use scouring powders, as they may damage the smooth, non-stick
surfaces of the basket and the pot).
1.Steak 2. Chicken 3. Shrimp 4. Fish 5. Pizza 6. French fries 7. Cake 8. Dry Fruit 9. Manual
3 Place the main body (5) on a stable horizontal surface, connect the power cord (8) to a grounded power socket, select the first
program (see the section on using the device) in order to remove factory odors from the device.
4. When the program is complete, unplug the power cord (8) and repeat step 2 to clean it again when it is completely cool.
1. Remove the packaging, stickers and accessories that are outside and inside the device.
Do not wash the basket (2) and the pot (6) in the dishwasher.
Using the device:
3. Place the previously prepared products in the basket (2) and put them in the main body (5) (fig. 3). When filling the basket, do not
exceed the MAX level located inside it.
1. Holding the handle (4), pull the pot (6) together with the basket (2) from the main body (5) (fig.1) and place it on a stable surface.
Note: Do not press the release button (3) while doing this.
5. Press the on / off button (B). The device turns on and sounds an alarm. If no program has been selected, the device will go into
standby mode after 1 minute.
Programs:
9. To turn off the device, hold down the button (B) for 3 seconds.
8. When the backing operation is finished, the device will beep 6 times. The device will automatically enter to keep warm mode, the
indicator (H) will light up. The device will operate for 30 minutes, maintaining a constant temperature of 70 ˚C inside the basket (2).
Arrange the food pieces in such a way that there is a free flow of hot air between them.
The device has got memory program. After removing the pot (6) during the program to check with food backing status, the device will
stop. After reinserting the pot (6) again , the device will continue to work. The program can also be paused by pressing the On/Off
button (B) once, pressing again will resume.
!!WARNING!! The inside of the device is very hot.
It is possible to manually select the time and temperature, to do this must be set desired temperature and time without pressing
button (A).
6. Use the menu selection button (A) to select the desired program (table 1). After selecting the program, you can change the
temperature and time by pressing the temperature adjustment button (C) +/- and the time adjustment button (D) +/-. It is
recommended to add 3 minutes to the cooking time, in relation to the programmed menu, if the device is cool.
If the time or temperature is not sufficient, you can always adjust the time or temperature by pressing the time (D) / temperature (C)
adjustment button to refine the food.
It is recommended to check with food backing status and invert or stir the products at least once while the selected program is
running.
Steak (1): Program mainly used for thicker cuts of white or red meat.
The device will automatically heat at 180˚C for 16 minutes.
7. After selecting the appropriate program and adjusting the time, press the button (B), the device will start working. The indicator light
(E) of the fan operation for the thermostat operation indicator (F) will light up. While the device is operating, the indicator light (F) will
switch on and off for the device maintains the appropriate operating temperature of the thermostat.
Chicken (2): Program used to prepare raw chicken meat.
If the time or temperature is not sufficient, you can always adjust the time or temperature by pressing the time (D) / temperature (C)
adjustment button to refine the food.
The device will automatically heat at 180˚C for 25 minutes.
Tips:
If the time or temperature is not sufficient, you can always adjust the time or temperature by pressing the time (D) / temperature (C)
adjustment button to refine the food.
2. The basket (2) can be removed from the pot (6) by pressing the button (3), previously sliding the safety button (fig. 4).
4. Connect the closed device to a grounded power socket.
6