4
19. 3.5mm JACK HEADPHONES OUT
NAVIGATE INTO THE MENU
6. REPEAT/INFO
7. MENU / PROGRAM
8. SEARCH - / PREVIOUS TRACK
12. ENTER / STOP
13. PRESET
14. VOLUME C/-
4. Select the desired audio source by turning the [MODE] knob (4);
1. Press the [MENU] button (3) to access to the options;
2. Use the [SKIP -/+] buttons (8/9) to navigate into the options;
16. POWER CORD
17. ANTENNA SOCKET
18. RCA AUX INPUT (L+R)
9. / NEXT TRACK
10. SCAN / PAUSE / PLAY
11. RECORD / DELETE
2. Press the [POWER] button (4) to power ON;
3. (The first time you power on the radio, the radio will scan the DAB radio stations
automatically
Press the [SCAN] button (10) and the radio will automatically scan the radio. During
the scanning process, the radio will save the scanned stations sequentially into the
memory.
TO USE THE RADIO
2. Press the [TUNE -/+] buttons (8/9) to manually select the frequence or press
and hold (2 seconds) to scan the next/previous available station.
Note: For a better reception reorient the antenna (17).
STORE RADIO STATIONS AUTOMATICALLY:
Note: For a better reception reorient the antenna (17).
FM RADIO OPERATION
1. Set the Mains [POWER SWITCH] (0) to ON;
1. Select “FM”mode by turning the [MODE] knob (4);
1. Select “DAB”mode by turning the [MODE] knob (4);
2. Use the [TUNE -/+] buttons (8/9) to select the desired radio station.
Note: In case there is No DAB Service, press the [SCAN] button (10) to start scan.
LOCATION OF CONTROLS
Note: If the display does not function properly or no reaction to operation of any
The sleep timer switches the radio off automatically after an adjustable time.
then turn the power back on after a few seconds.
DAB RADIO OPERATION
6. Use the [SKIP -/+] buttons (8/9) to select “yes”;
AC POWER: To power your radio, plug the AC power cord into into a wall AC power
outlet. Check that the rated voltage of your appliance matches your local voltage.
7. Confirm with the [ENTER] button (12).
SLEEP TIMER
3. Confirm with the [ENTER] button (12);
4. Use the [SKIP -/+] buttons (8/9) to select “Factory Reset”;
5. Confirm with the [ENTER] button (12);
control may due to the electrostatic discharge. Switch off and disconnect the AC cord
FACTORY RESET
1. Press [MENU] (3) to access to the menu;
2. Use the [SKIP -/+] button(8/9) to navigate into the options and select “System”;
3. Press [ENTER] button (12) to select the options;
4. Press [MENU] (3) to exit the menu.
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
0. POWER SWITCH
1. DISPLAY
2. CD TRAY
POWER SOURCES
15
.
Avoid getting the
device
wet.
5. (Please see detailed instructions for each Source in the following chapters);
6. Adjust the volume with the [VOLUME KNOB] (14) to the desired level;
7. To power OFF the radio, press the [POWER] button (0).
16
.
The
device
may only be wiped with a dry cloth. Do not use water or cleaning fluids.
3. CD TRAY OPEN/CLOSE
4. STANDBY/SOURCE
5. USB PORT
17
.
The
device
should be kept in a dry room.
. It will display and play the first station after the scan is done);
Содержание Premium CR 1182
Страница 2: ...2 ...
