Installation QSG: eQCM 10M - 988-00025 - Rev 1.0 - Gamry Instruments © 2012
R
ESONATOR
O
VERVIEW
Find the resonant frequencies.
• Enter the center (nominal) frequency of your crystal and
press ‘Single Scan’.
• If you do not see a nice S-shaped spectrum such as the
one shown here, increase your frequency window and
press ‘Single Scan’ again.
Once you find the appropriate window, drag the two green
cursors closer to
f
s
and
f
p
.
You can now begin continuous acquisition by pressing
‘Start’.
Set up your potentiostat on the ‘Potentiostat’ tab if you are
performing EQCM work.
QCM data acquired during an EQCM experiment will be
saved automatically in the data file.
QCM data acquired for a stand-alone QCM experiment
needs to be saved using the disc icon or by clicking ‘Save’
under the file menu.
