Camrivox Flexor 500 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 76

background image

IP Telephone User Guide

48

Click on Save Settings when you have added all the details for the new
account.

The Accounts page will be displayed and from the drop-down list box
a new entry will have been created, prefixed with Manual to identify
this account as one that has been manually entered.

Setting a region

The Region web page enables you to configure the region where you are
using your device and the time zone for that region. Setting the time zone
ensures that your device is always using the correct time.

To configure region information, click on the Region link in the Home
page. The Regional Settings window is displayed:

From this page you can set the following information:

The Region or Country where you are using the device

The Time format for displaying the time on subsequent web pages.
The time can be displayed in 12-hour or 24-hour format.

Time zone for the region where you are using the device.

Setting the region

The region where you are using the device is setup when you first
configure the device and so you should normally not need to change this
setting. (See

Step 3. Select your country

on page

.)

To set the region or country where you are using the device, follow the
procedure below:

Choose the country from the Region or country drop-down list box.

Click on Save Changes.

The Home page is displayed.

The call progress tones are also updated to use the tones specific to the
region that has been selected.

Setting the time format

All call information displayed by the web pages contains details about the
time of the call. You can configure the display of this time to be shown in
12-hour or 24-hour format.

The time format is also used on the Flexor 500 display for the current
time.

To set the time format, follow the procedure below:

«
...
46
47
48
49
50
...
»

Содержание Flexor 500













































































Отзывы:

Нет отзывов

Похожие инструкции для Flexor 500

Бренд: Yealink Страницы: 2

Бренд: KALLIOPE PBX Страницы: 2

Бренд: Radio Shack Страницы: 64

Бренд: Camrivox Страницы: 4

Бренд: Handspring Страницы: 2

Бренд: palmOne Страницы: 14

Бренд: Lancom Страницы: 50

Бренд: Acer Страницы: 56

Бренд: Light Repute International Страницы: 15

Бренд: Grandstream Networks Страницы: 25

Бренд: Mircom Страницы: 39

Бренд: cromax Страницы: 9

Бренд: Profoon Страницы: 56

Бренд: Alcatel Страницы: 2

Бренд: EMPORIA Страницы: 2

Бренд: FLY Страницы: 91

SPRINT SPH-L600

Бренд: Samsung Страницы: 159

MyShot II SCH-R460 Series

Бренд: Samsung Страницы: 153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды